Two Input NAND Gate
To study the NAND digital logic gate and verification of the truth table.
In Stock
In Stock
Related Products
Related products
-
Electronics
Analog to Digital Converter
0 out of 5(0)The ADC unit converts an analog signal to digital signal. When a variable voltage is applied to the input terminals it is converted into a digital output. Therefore, a 3 volt input will correspond to binary 11, and 7 volt will correspond to binary 111. A low frequency AC input signal can be converted into a changing digital value. Use on its own or combined with the DAC to decode back into a stepped analogue voltage.
PH92370A -
Electronics
Emitting Diode (LED’s)
0 out of 5(0)Bridge rectifier is designed with four LED’s internally arranged in bridge pattern fitted inside a plastic mouded case. Two LED’s are red and two LED’s are green. This device is used to demonstrate the functioning of a bridge rectifier, i.e., to convert alternating current (AC) into direct current (DC). Two yellow sockets are used for AC input. Two sockets, one red and one black, are used for DC output. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
PH92354 -
Electronics
Bridge Rectifier
0 out of 5(0)Bridge Rectifier is made of four diodes connected in a bridge circuit. It is housed in a plastic moulded box. This bridge rectifier converts alternating current (AC) into direct current (DC). It provides the same output polarity for either input polarity. All the electronic devices require direct current, so bridge rectifiers are used inside the power supplies of almost all electronic equipment. For the easy understanding of the internal circuitry, the circuit diagram is printed on the box.
PH92352 -
Electronics
Numerical System
0 out of 5(0)This panel is used to demonstrate the number systems such as binary, decimal and hexadecimal numbers. Toggle switches used to activate the displays showing the particular number entered. Input may be entered either as decimal or binary numbers with a toggle switch for mode selection. Decimal numbers are shown on a three digit seven segment LED display. Operates on 220V.
PH93002









