Twin Tone Bar Set
To demonstrate resonance, sympathetic vibrations and beat phenomenon. The two precision-made bars are mounted on a single solid resonance cavity. The cavity has two chambers with one bar tuned to 440 Hz, the other to 441 Hz. Includes: hammer and instructions.
In Stock
In Stock
Related products
-
Wave & Sound
Ripple Tank
Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet. The tank edges are shaped to minimise undesired reflections. Tank has a drain hole closed by a rubber stopper. With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height. The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam. The motor has an eccentric weight which causes the beam to oscillate. Two point sources are provided by two plastic spheres, each mounted on a right angle rod. A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant. Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm. Complete with following accessories :-
- Two straight obstacles of aluminium alloy length 130 mm.
- One straight obstacle length 40 mm.
- One curved reflector radius 200 mm.
- One trapezoidal plastic plate for refraction.
- One wood hand wave roller.
- One water dropper.
- One pkt. rubber bands.
- One foam plastic sponge.
- One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod which can be attached to a retort stand. With instructions.
Without power supply
PH36044 -
-
Wave & Sound
Sonometer, 3-Wire
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100N x 5N and its tension can be adjusted by a winged nut and measured. Another wire passes over a pulley and can be loaded as desired. A third wire, for comparison, can have its tension adjusted by a wrest-pin. With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
PH36105 -
Wave & Sound
Hand Vacuum Pump
The vacuum pump is made of durable plastic. It can easily provide a vacuum of 500mmHg by pumping its handle, the pumping rate of which is about 15ml per pumping. The pump itself is sealed and self lubricated. By changing its working mode, the pump can be used to establish air pressure as high as approx. 2 atm. It is a must for middle and primary school laboratories.
PH36018B
