Tuning Forks, Set of 2
The forks have threaded shanks and will screw in the box tops. Frequency of each is A (426). One fork is fitted with a sliding mass to alter its frequency. On sounding both forks, a clear ‘beat’ is produced. Supplied with one hammer. Size of box 180 x 88 x 53 mm approx.
In Stock
In Stock
Related Products
Related products
-
Wave & Sound
Sonometer, 3-Wire
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100N x 5N and its tension can be adjusted by a winged nut and measured. Another wire passes over a pulley and can be loaded as desired. A third wire, for comparison, can have its tension adjusted by a wrest-pin. With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
PH36105 -
Wave & Sound
Electronic Frequency Controller
Electronic Frequency Controller for use with ripple tank, to operate both the vibrator and a lamp for illumination. A digital display with two control knobs one for Frequency and another for amplitude are provided. Output signal is square wave from 1-100 Hz with increment set of 1Hz.
PH36069 -
Wave & Sound
Kinetic Theory Model
The Kinetic Theory Model apparatus is used along with the vibration generator to demonstrate the movement of molecules in a gas. An approximate relationship between the floating height, i.e., volume of the gas and weight of the disc, i.e., pressure of the gas can be observed. The platform has a rubber surface and small stainless steel balls are loaded into the tube. With the change in the speed of vibration generator, the heating of the gas stimulates resulting change in the agitation of the balls inside the tube. It comprises theory of piston, steel balls and a base or placing on an overhead projector.
PH36214B -
Wave & Sound
Bell Jar and Vacuum Pump Set
Simple, innovative kit allows you to perform a number of experiments on vacuum and air pressure. The kit clearly demonstrates the method by which a pump works. Also illustrates that air has mass and helps find its mass and density. Explain the effect of surrounding air pressure on a sealed balloon. The balloon will expand when the surrounding air is removed. And also demonstrate that liquid boils at reduced temperature when the surrounding air pressure is reduced. with 2 balloons With instructions.
PH36013
