Slinky Spring with Stand
Long slinky for super wave demonstrations. On stand with instructions.
In Stock
In Stock
Related Products
Related products
-
Wave & Sound
Ripple Tank, Dual Purpose
This dual purpose tank is a versatile apparatus allowing all types of waves and wave motion. With illuminator lamp and important accessories included it forms a complete ready to use unit. The unique design and size allows it to be used on an overhead projector as well. Supplied in foam packing and consists of the following components :
- Ripple Tank 40 x 40 cm.
- Four push Fit Legs.
- Ripple motor with eccentric cam, mounted on PVC bar.
- Three supports for illuminator and the motor unit.
- Motor hanging clamps.
- Spring for motor support.
- Lamp Unit halogen 6 Volts.
- Concave Perspex Plate.
- Convex Perspex.
- Rectangular Perspex Plate.
- Curved Reflector.
- Barrier Large.
- Barrier Small.
- Plastic Roller Bar.
PH36068 -
Wave & Sound
Sonometer, 3-Wire
Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100N x 5N and its tension can be adjusted by a winged nut and measured. Another wire passes over a pulley and can be loaded as desired. A third wire, for comparison, can have its tension adjusted by a wrest-pin. With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
PH36105 -
Wave & Sound
Hand Vacuum Pump
The vacuum pump is made of durable plastic. It can easily provide a vacuum of 500mmHg by pumping its handle, the pumping rate of which is about 15ml per pumping. The pump itself is sealed and self lubricated. By changing its working mode, the pump can be used to establish air pressure as high as approx. 2 atm. It is a must for middle and primary school laboratories.
PH36018B
