Slinky, Plastic
Easier to handle as it does not tangle. Size 63 mm diameter x 65 mm length.
In Stock
In Stock
Related Products
Related products
-
Wave & Sound
Sonometer, 3-Wire
0 out of 5(0)Hollow wooden sounding box 1290 x 130 x 110 mm, with mm scale, has two fixed bridges 72 cm apart over which wires are stretched. To one wire is fitted a spring balance reading to 100N x 5N and its tension can be adjusted by a winged nut and measured. Another wire passes over a pulley and can be loaded as desired. A third wire, for comparison, can have its tension adjusted by a wrest-pin. With 3 movable bridges, wrest-pin key, spring balance, and set of four wires of different diameters, each 1.5 meter long, without masses.
PH36105 -
Wave & Sound
Ripple Tank
0 out of 5(0)Transparent acrylic plastic ripple tank, supported in a sturdy plastic frame which has recesses to hold four legs with leveling feet. The tank edges are shaped to minimise undesired reflections. Tank has a drain hole closed by a rubber stopper. With two light alloy uprights to carry a horizontal rippler support rod which is adjustable for height. The ripple assembly, elastically suspended from the support rod, consists of a 4 – 6 V DC motor mounted on a wooden beam. The motor has an eccentric weight which causes the beam to oscillate. Two point sources are provided by two plastic spheres, each mounted on a right angle rod. A metal rod is fixed centrally into a socket in one short side of the frame to afford support to the illuminant. Overall size of the tank 580 x 500 x 80 mm, window area 370 x 280 mm, height of tank above bench level (with legs attached) approx. 375 mm. Complete with following accessories :-
- Two straight obstacles of aluminium alloy length 130 mm.
- One straight obstacle length 40 mm.
- One curved reflector radius 200 mm.
- One trapezoidal plastic plate for refraction.
- One wood hand wave roller.
- One water dropper.
- One pkt. rubber bands.
- One foam plastic sponge.
- One illuminant with a 12 V, 24 W lamp mounted in a lamp house and provided with a long supporting rod which can be attached to a retort stand. With instructions.
Without power supply
PH36044








