Power Supply 12V AC and DC
Mains Input: 220V (±10 %), 50/60 Hz.
Output Voltage: 2 to 12VAC in 2V steps. Full wave rectification 2 to 12VDC in 2V steps.
Protection: Both outputs are provided with overload and short circuit protection.
In Stock
| Cat. No. | Output current | Quantity | |
|---|---|---|---|
| PH61010/1 | 1A | ||
| PH61010/2 | 2A | ||
| PH61010/5 | 5A |
Related Products
Related products
-
Electrical Accessories
Cell Holder, Single
Supertek single cell holder is a high quality easy to load and easy to remove the standard D size battery. It is fitted on the sturdy plastic base. 4mm sockets are provided for the output. Two or more cell holders can be used for the parallel or series combinations. Supplied without battery.
PH60119S -
Electrical Accessories
Power Supply, Continuously Variable, 25V
The power supply provides continuously variable AC and DC outputs. A meter is provided to indicate both AC and DC voltages. An internal fuse is provided at input and a resettable cut-out for output.
Mains input: 220 V (±10 %), 50 / 60 Hz.
Output Voltage: 0 to 25 V AC and wave rectified DC
Output Current (Max.): 10 A for AC, 8 A for DC
Voltage Selection: Voltage is controlled by a large rotating knob on front panel.
Display Meter: Analog meter for AC and DC voltages. Selector switch to select between AC and DC.
Circuit Protection: Mains input 3 A internal glass fuse link. Output is protected by a resettable cut-out.
Output Terminals: Colour coded 4 mm sockets.PH61015 -
Electrical Accessories
Cell Holder, Double
Supertek double cell holder is a high quality easy to load and easy to remove cell holder for holding two standard D size batteries. It is fitted on the sturdy plastic base. 4mm sockets are provided for the input signals separately with each cell holder. Double cell holder can be used as a single cell holder by using only one cell holder. It may also be used for the parallel or series combinations of two cells. Supplied without battery.
PH60119D
