Demonstration Transformer
With one mains coil, 240 V, 50 Hz, 2400 turns and two interchangeable secondary coils 65 and 130 turns giving outputs of 6 and 12 V approximately at 2 A maximum.
In Stock
In Stock
Related Products
Related products
-
Electricity
Demountable Transformer
0 out of 5(0)This heavy duty demountable transformer can be used for the study of transformer theory and many other alternating current phenomena. This kit consists of:
- A magnetic circuit made of highly permeable U shape metal sheet, which can be closed using two clamps with tightening screws.
- Section: 40 x 40 mm with 150 mm length and 170 mm height.
- One coil of 6000 turns with maximum current of 0.2 ampere. Intermediary coil of 2000 turns output.
- One coil of 600 turns with maximum current of 2.5 ampere, which is mainly used to create the primary of transformer.
- One coil of 1200 turns, with maximum current of 1.25 ampere, fitted with intermediary 400 and 800 turns’ outputs.
- One coil of 72 turns, with maximum current of 12 ampere, fitted with intermediary 6, 30, 54 and 66 turns’ outputs.
- Power supply cable.
PH50170 -
Electricity
Earth, Neutral And Live Board Demonstration
0 out of 5(0)This apparatus is an effective demonstration of how the earth wire and fuse act together to protect both the user and the appliance.
When the appliance is connected correctly and the LEDs in the appliance will illuminate to show the appliance is working. A fault is then demonstrated by swapping the live wire from inside the appliance to the case to show either the fuse melts (protecting the user and appliance) or in the case of no earth wire, the LEDs illuminate to indicate the passage of current through the person to ground. The fuse is easily visible and can be seen to ‘blow’ when a fault occurs. The unit is supplied with 10 metres of fuse wire and full instructions. A 12V D.C. power supply is required. Connections are made via 4mm shrouded sockets.PH50136E -
-
Electricity
Simple Circuit Modules
0 out of 5(0)Designed to demonstrate to implement and applications of electrical, electronic devices and simple circuits. These modules are fitted with 4 mm sockets. Components are directly mounted on printed PCB with diagram. Various modules are available as following:
PH50138










