Calorimeter Set
Consisting of a joint less copper calorimeter 75 x 50 mm on rubber supports, spun outer copper vessel of 100 x 75 mm diameter copper lid for outer vessel with central tubule for thermometer and slit for copper stirrer, with a looped copper stirrer for the inner vessel.
In Stock
In Stock
Related Products
Related products
-
Heat
Linear Expansion Apparatus, Micrometer Screw Form
A 500 mm long metal rod is supported in a plated brass tube with three tubules for steam inlet, outlet and thermometer. The tube is mounted on a stand with an adjusting screw at one end and a micrometer screw reading to 0.01 mm on the other, with terminals for connecting a bell or galvanometer to indicate contact. With copper, brass and iron test rods but without thermometer.
PH20044 -
Heat
Ice Melting Kit
Demonstrates the difference in thermal conductivity of two different materials. The kit consists of two identical blocks, one made of aluminum and other made of plastic. When an ice cube is placed on aluminum it turns into water in seconds, while on plastic block, it melts slowly. The aluminum block has a larger heat capacity and a higher thermal conductivity, while the plastic block has lower values of both parameters. With instructions.
PH20095 -
Heat
Immersion Heater
Specially designed for metal block calorimeters. The heating element is enclosed in a stainless-steel tube with two connecting leads, insulated with heat-resistant insulation. The stainless-steel enclosure features a sealed base to prevent water leakage and a threaded cap at the opposite end for the insertion of a porcelain pipe. Rated at 12 V, 50 W.
PH20185S
